Log in if you already have an account. If you would like to become an editor for the wiki, request an account.
Logan Rover
 |
This article or section is a stub. This means it lacks key information or is not complete yet. You can help by adding to it. Click here to see some more stubs to work on. |
The Logan Rover was designed and/or thought up by Logan Su.
- Year Built In: 2009
- Competition Built For: FIRST Robotics Competition
Mechanics
Intake System
The intake system on the Logan Rover consisted of two parts:
- Tubing
- Fingers
Tubing
The tubing consisted of eight or so yellow bands stung up inside the robot. After the balls were taken in by the fingers, the tubing would roll them up inside the robot along side some polycarbonate placed behind the control system.
Fingers
The fingers on the robot were attached to the pulley system that turned the tubing. The fingers were technically screws with no heads tapped into some short pieces of stiff tubing around three to four inches long. Often times, fingers had to be replaced after every match because they would break or fall off.
Unobtanium Motor
The main propulsion of this robot was the unobtanium motor. Unobtanium is some very grippy material in a tube form that the team has found. On the Logan Rover, it was attached to a axel and powered by a motor geared for speed.